AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Richardson?
Furnace replacement in Richardson typically runs $3,200 to $7,400 for the equipment and installation, with most homes landing between $4,200 and $5,800. A straightforward swap of an old furnace for a new one at the same efficiency and size sits at the low end. A bigger job, meaning upsized ductwork, new venting, or a move to a high-efficiency two-stage unit, pushes toward the top. That range is what the work typically costs here; your written estimate sets the final price for your home.
We give free estimates at Juniper AC Repair, so you’ll see the number before anyone starts. Our technicians have up to 14 years of experience and work on the brands most Richardson homes already have, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If your system says “Goodman” or “Trane” on the panel, we’ve met it before.
Key Takeaways
- Typical Richardson furnace replacement: $3,200-$7,400, with $4,200-$5,800 the most common band.
- Furnace repair in Richardson runs $150-$700, so a fix under about $700 is usually worth doing before you replace.
- Most replacement jobs take one working day, two if venting or duct changes are involved.
- Richardson’s mild winters mean efficiency upgrades pay back slowly here, so sizing and venting often matter more than the efficiency rating.
- Free estimates: call (855) 419-6908.
Furnace Replacement Cost Breakdown (2026)
These are typical estimated ranges for a Richardson home. The list below separates what the equipment costs from what the labor, venting, and cleanup add. Your written estimate will combine them into one number.
| Line item | Typical estimated cost | Notes |
|---|---|---|
| Single-stage furnace (80% AFUE), equipment | $1,400-$2,600 | Standard replacement in most Richardson homes |
| Two-stage or modulating furnace, equipment | $2,600-$4,600 | More even heat, quieter operation |
| Labor and installation | $1,100-$2,000 | Removal, setup, connection, testing, haul-away |
| New venting or flue work | $300-$900 | Needed when the old flue doesn’t match the new unit |
| Ductwork repair or modification | $250-$1,200 | Sealing, resizing, or reconnecting to the new air handler |
| New thermostat | $120-$350 | Basic programmable to smart thermostat |
| Condensate and drain work | $150-$400 | For high-efficiency condensing units |
| Permit and inspection | $80-$250 | Most cities require a permit for a furnace swap, so ask Richardson’s building department |
When we quote a furnace replacement in Richardson, the number that surprises people most is venting. Older homes often have a flue sized for an older furnace, and a new high-efficiency unit condenses, so it vents differently. That single change can move a job from the low end to the middle of the table. Ductwork is the other wild card: a system installed decades ago in a house that has since had rooms added rarely lines up perfectly with a new air handler.
Equipment size matters too. A three-ton house needs a different furnace than a five-ton one, and undersizing a unit to save money is a mistake you’ll feel every cold snap for years. We size to the house, not to the old label. Free estimates mean you get a real number before you commit: call (855) 419-6908.
What Affects Furnace Replacement Pricing in Richardson
Two homes on the same block can get quotes $1,500 apart. Here’s what moves the price here.
- Furnace size and capacity. Richardson has a wide mix of housing stock, from 1950s ranch homes around the older core to larger builds toward the northern neighborhoods. A larger square footage needs a bigger unit, and bigger units cost more. We measure the house and the existing duct system before quoting.
- Efficiency level. An 80% single-stage furnace is the practical choice for many homes here. A two-stage or modulating model costs $1,200 to $2,000 more in equipment. Richardson winters are mild, so the extra efficiency doesn’t pay back as fast as it would somewhere colder. We’ll tell you honestly whether it’s worth it for your house.
- Venting setup. A straight swap onto the existing vent is cheap. A change from an older flue to a high-efficiency condensing setup adds real cost. Attic-installed furnaces, which show up in some Richardson homes, also add labor.
- Ductwork condition. Leaky, disconnected, or undersized ducts are common in older homes and need to be dealt with at the same time. Repairing them during replacement is far cheaper than coming back later.
- Access. A furnace in a closet off a hallway is easy. One tucked in a tight attic or crawl space adds time and sometimes a helper. Tight access shows up in the quote.
- Brand and parts availability. We work on nine major brands, so replacement options at any budget are on the table. A value-tier Goodman and a premium Trane or Lennox solve different problems. We recommend what fits your house and budget rather than steering you to one manufacturer.
Should You Repair or Replace Your Furnace in Richardson?
Repair usually wins when the fix costs less than about $700 and the furnace has life left in it. Furnace repair in Richardson typically runs $150-$700, and a lot of no-heat calls are covered by a repair rather than a replacement. Replace when the furnace is old enough that a repair just buys time, when the repair cost approaches what a new unit would cost, or when the heat exchanger has failed. Heat exchangers are the one part that changes the decision, and we’ll explain why under the repair-or-replace FAQ below.
A tune-up on a working furnace costs $80-$200 and can catch a problem before it becomes a mid-winter emergency. If you’re on the fence, the estimate is free and there’s no pressure to decide on the spot. Call (855) 419-6908.
How Long Does Furnace Replacement Take in Richardson?
Most Richardson furnace replacements take one working day, roughly six to eight hours. The old unit comes out in the morning, the new one goes in, and we test it before we leave. Two-day jobs happen when venting or ductwork needs more than a quick adjustment, or when the new furnace has to be set into a tight attic space. We’ll tell you at estimate time which one you’re getting, so you can plan around it.
What’s Included in a Furnace Replacement
The written estimate should spell out every piece of the job. Ours covers the equipment, removal and haul-away of the old furnace, all connections, a startup and safety check, and a walkthrough of the new system before we leave. If anything on the list isn’t in the estimate, ask about it before signing. No-surprise service means you know the scope before the job starts, not after.
If you’re also thinking about the cooling side, we handle AC installation alongside furnace work, so you don’t need a second contractor when summer arrives. One company, every season. Since we also work on the heating and cooling in the same house, we already understand how the two systems share ductwork.
Why Richardson Furnaces Wear Out the Way They Do
Mild winters don’t let a furnace off the hook. In a Richardson home, the heating system runs in shorter stretches over more of the year, so it cycles on and off more than a furnace that runs long and steady somewhere colder. Short cycling is hard on the ignition system, the blower, and the heat exchanger over time. It also hides wear: a furnace that never runs long enough to show a problem can fail without much warning on the coldest night of the year.
The other local factor is where the furnace lives. Many Richardson homes put the furnace in the attic or a closet, sharing space with the AC air handler and the ductwork. That means the furnace sits in a hot attic through the summer, aging quietly while the AC does the work, then gets called into service in December. When you replace it, it’s worth having the attic ducts checked at the same time. If you want a full picture of what we cover across the city, see our Richardson page.
How to Save on Furnace Replacement
The biggest savings come from planning before you’re desperate, not from a discount at the last minute.
- Get the estimate while the furnace still works. A planned replacement costs less than an emergency one because you can compare options and don’t pay for the urgency of a cold-night situation. Book the estimate early, in fall if you can.
- Fix the repair first if it makes sense. At $150-$700 for a furnace repair in Richardson, a working furnace that just needs a blower motor or ignitor is worth fixing. Replacement is for the cases where repair no longer makes sense.
- Bundle ductwork with the replacement. Fixing leaky ducts at the same time as the furnace swap is much cheaper than a separate visit. It also helps the new unit perform the way it was designed to.
- Match the efficiency to the job, not the brochure. A high-efficiency furnace is a fine piece of equipment, but in a Richardson climate the payback period is long. A well-sized, well-installed 80% furnace often beats a high-efficiency unit that was never sized right.
- Right-size instead of upsizing “for safety.” A properly sized furnace runs more efficiently and lasts longer than one that’s oversized and short-cycles. We size to the house.
- Keep up with tune-ups. A tune-up at $80-$200 extends the life of a furnace and catches small problems before they get expensive. It won’t prevent every failure, but it’s the cheapest thing you can do.
Free estimates are the easiest saving of all: we quote the job before anyone touches your system, and the written estimate sets the final price. Call (855) 419-6908. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Furnace Replacement Cost
How much does furnace replacement cost in Richardson?
Furnace replacement in Richardson typically costs $3,200-$7,400, with most homes landing between $4,200 and $5,800. The low end is a straight swap at the same size and efficiency. Venting changes, ductwork, and bigger units push toward the top. Call (855) 419-6908 for a free estimate that sets your exact price.
Is it cheaper to repair or replace a furnace?
Repair is cheaper in the short term when the fix runs $150-$700 and the furnace has life left in it. Replace when the repair cost climbs toward the price of a new unit, or when the heat exchanger has failed; a cracked heat exchanger is a safety issue, not a maintenance item, and a new furnace is the answer. Call (855) 419-6908 and we’ll tell you which side of that line your furnace is on.
How long does a furnace replacement take in Richardson?
Most jobs take one working day, about six to eight hours. Allow two days if venting or ductwork needs significant change, or if the furnace sits in a tight attic space. The estimate tells you which timeline applies before the job is scheduled.
Do I need a permit for a furnace replacement in Richardson?
Most cities require a permit for a furnace replacement, so ask Richardson’s building department before the job is scheduled. Permit and inspection typically runs $80-$250 and should appear on your written estimate. We’ll walk you through what your city requires.
Can you come today if my furnace quit?
Same-day service is often possible, especially in heating season when no-heat calls come in fast. Call (855) 419-6908. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If dispatch is closed, we’ll book you into the next opening.
What to Do Next
If your furnace is limping through winter, the smart move is a free estimate while you still have heat. You’ll get a real number for a replacement in your Richardson home, a clear case for repair if the furnace still has life, and a scope of work in writing. Call (855) 419-6908. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you need a furnace repaired or replaced, or you’re lining up AC installation for the summer, we can look at both while we’re there.
Pricing reflects the Richardson market as of 2026. Juniper AC Repair offers free estimates – call (855) 419-6908.
What Our Customers Say
"Ductwork in the attic had a disconnected run that had been dumping cold air into the insulation for who knows how long. He found it, resealed it, and one bedroom that was always hot is now normal."
- Jason Sutton"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."
- Ruben Flores"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."
- Reggie Freeman