AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted AC Installation for Richardson Homeowners
When a Richardson summer pushes your system past what it can recover from, AC installation is the decision that gets your house comfortable again. It’s also a decision worth slowing down for: the equipment, the sizing and the installation quality all shape what your electric bills look like for the next decade. Our technicians have up to 14 years of experience and work on Carrier, Trane, Lennox and Goodman equipment without needing a second opinion. We give you a written fixed price, a set install date, and no surprise line items when the equipment shows up. Installation is scheduled, never rushed, because a load calculation comes before a quote. We answer 24/7. Call (855) 419-6908 to get started with a free estimate.
Furnace Installation
Furnace Installation is the job of putting a new heating unit into a Richardson home when the existing one has reached the end of its useful life or no longer heats safely. You’ll know it’s time when repairs stack up faster than the seasons change, when the unit short-cycles through a mild North Texas cold snap, or when a technician tells you the heat exchanger is compromised. At that point replacement is the safer path, and we walk you through it in plain terms. Juniper AC Repair handles the furnace side of the house under the same name as the cooling side, so you’re not hunting for a second contractor in January. Typical estimated furnace installation in Richardson runs $3500 – $7500 depending on efficiency rating, size and ductwork condition, and your written estimate sets the final price.
What a New Furnace Involves
We start with a size calculation for the home, not a guess based on the old unit. Removing the existing furnace and checking the venting and flue come next, since those often need adjustment when the new unit is a different efficiency class. Then the new unit goes in, and we test it through a full heating cycle before we leave.
Gas Safety Comes First
Gas connections and combustion venting are not a place for shortcuts. We check for leaks and proper draft as part of the install, and we’ll flag anything that needs a licensed trade outside our scope. If you ever smell gas in your home, leave and call your gas utility before anything else.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
HVAC Installation
HVAC Installation is the project of replacing both halves of your home’s climate system at once, the cooling side and the heating side, when either a matching setup makes sense or when both have aged out together. In a Richardson house where the furnace and AC were installed at the same time, they often fail within a season or two of each other, so pairing the work saves you a second tear-out later. Juniper AC Repair covers the whole job under one name. We size the equipment, coordinate the install, and test both heating and cooling before we call it done. Typical estimated HVAC installation for a combined system runs $3500 – $7500, and the written estimate sets the final price.
When to Replace Both Systems
If the furnace is past its useful life and the AC is on its last few summers, replacing together usually beats two separate projects. It also lets you match equipment so the air handler and condenser work well as a pair. We’ll tell you honestly when replacing only one makes more sense.
What the Combined Install Covers
The combined install covers removal and haul-away of both old units, new equipment placement, and testing through heating and cooling cycles. We check airflow and refrigerant charge before we leave. You get a single written price for the whole job.
Heat Pump Installation
Heat Pump Installation puts a system in your Richardson home that handles both heating and cooling from one outdoor unit, which suits a climate with mild winters and long, hot summers. If you’re replacing an aging setup and want one piece of equipment to cover both seasons, a heat pump is worth discussing. It’s also a reasonable choice when ductwork is already in place and you want a single point of responsibility for year-round comfort. Juniper AC Repair installs and services heat pump equipment from major brands, and our technicians have up to 14 years of experience with them. Typical estimated heat pump installation in Richardson runs $3500 – $7500 depending on system size and efficiency, and the written estimate sets the final price.
How a Heat Pump Differs From a Standard AC
A heat pump moves heat rather than generating it, so the same equipment cools in summer and warms in winter. That dual function is why the sizing and the defrost controls matter more than on a cooling-only unit. We test both modes before handoff.
What to Check Before You Choose One
Your existing ductwork and electrical panel capacity both need a look before a heat pump quote is firm. We check both as part of the estimate. If either needs work, you’ll know before the install date, not after.
Ductless Mini Split Installation
Ductless Mini Split Installation is the right answer for a Richardson room that a central system doesn’t reach well, a garage conversion, an addition, or a house with no ductwork at all. A mini split puts a wall-mounted head in the room and a small outdoor unit outside, so you get targeted cooling and heating without tearing into walls. It’s also useful when one zone runs hot while the rest of the house is fine. Juniper AC Repair installs and services ductless systems from major brands. Typical estimated ductless mini split installation in Richardson runs $3500 – $7500 depending on the number of zones and how the refrigerant lines run, and the written estimate sets the final price.
Single-Zone vs. Multi-Zone
A single-zone system cools or heats one room, which is often enough for a converted garage or a home office. Multi-zone systems run several heads from one outdoor unit. We size based on room load, not square footage alone.
Placement and Line Routing
Where the indoor head goes affects airflow, and where the line set runs affects how much wall we open. We plan both during the estimate. The goal is a clean install with minimal disruption to your home.
AC Replacement
AC Replacement is different from a fresh installation: it’s the swap-out of an existing condenser and air handler for new equipment when the old system has become a repair liability. In Richardson, a system that’s limping through summer after summer with rising electric bills and repeated repairs is a candidate for replacement, especially once you’re facing a compressor failure. Juniper AC Repair handles the full replacement, from haul-away of the old unit to testing the new one through a cooling cycle. Typical estimated AC replacement in Richardson runs $3500 – $7500 depending on tonnage, SEER2 rating and whether the line set or ductwork needs updating, and the written estimate sets the final price.
Repair or Replace?
A repair makes sense when the system is reasonably young and the fix is minor. Replacement is usually the better call when the unit is older and repairs are recurring. We’ll give you the honest read on both options and let you decide.
What Happens to the Old Equipment
We remove the old condenser and air handler and haul them away as part of the job. Refrigerant is recovered properly rather than released. You don’t have to arrange disposal yourself.
Central Air Conditioning Installation
Central Air Conditioning Installation is the job of putting a full ducted cooling system into a Richardson home, whether that’s a first-time install in a house that never had AC or a full system replacement. If your home has ductwork in place, this is typically the most efficient way to cool the whole house evenly rather than cooling room by room. Juniper AC Repair handles the whole process: sizing, equipment selection from the major brands we’re certified on, install, and testing. Typical estimated central air installation in Richardson runs $3500 – $7500 depending on home size, ductwork condition and equipment efficiency, and the written estimate sets the final price.
Sizing the System to Your Home
An oversized unit cools too fast and cycles too often, which leaves rooms clammy and wears the compressor. Undersized equipment runs constantly and never quite catches up. We calculate load from your home’s actual characteristics, not a rule of thumb.
Getting Ductwork Right
Ductwork that leaks or is poorly routed undermines even good equipment. We inspect the existing ducts and flag sealing or repair needs as part of the quote. The goal is even cooling throughout the house, not just at the thermostat.
Brands We Service
We’re certified to install and repair equipment from nine of the most widely-owned HVAC brands, and that matters most when your technician already knows where a particular make tends to wear. Carrier units have specific controls and airflow characteristics we work with regularly. Trane and Lennox equipment, both of which sit at the premium end of the market, have their own service and commissioning procedures that we follow closely. Goodman units, popular on the value end, are ones we handle just as confidently when budget is the deciding factor.
Rheem, York, Daikin, Bryant and American Standard round out the list, so whether you have an older Bryant furnace paired with a newer Daikin condenser or a mix that came with the house, we can work with it. We’re brand-agnostic by design: we recommend the equipment that fits your home and budget, not the one a manufacturer pays us to push. Whether you have a Carrier system or any other make, we can help with installation, repair and replacement, and we never steer you to one brand because it’s easier for us.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Repairs keep piling up. When you’re calling for a fix more than once a season and the bills are climbing, the equipment is telling you something. Replacement often costs less over a few years than repeated repairs on an aging system.
- Your electric bills jumped without explanation. A sudden rise in summer cooling costs usually means the system is working harder than it should. That points to failing components or a unit that’s lost efficiency.
- The house never quite gets comfortable. Rooms that stay warm no matter what the thermostat says often signal undersized equipment or ductwork problems. A load calculation and duct inspection answer the question.
- You’re seeing unusual noises or smells. Grinding, rattling or a musty smell from the vents can indicate failing parts or a moisture problem in the system. It’s worth a professional look before it turns into a larger repair.
- The equipment is old and parts are scarce. Once a system is out of warranty and parts are hard to source, every breakdown means days without cooling. Planning a replacement on your terms beats an emergency swap in July.
Our Process, Step by Step
- 1
Free estimate and home assessment. We start with a load calculation for your home rather than a guess based on the old unit’s size. We look at insulation, window orientation and ductwork condition, then explain the options in plain terms, with a written fixed price for each.
- 2
Equipment selection. We recommend equipment that fits your home and budget across brands like Carrier, Trane and Goodman. You’ll see the efficiency ratings and the cost difference before you decide. Nobody pushes you toward a single manufacturer.
- 3
Scheduling and prep. Once you approve the written estimate, we set an install date and tell you what to expect. We confirm access to the indoor and outdoor equipment locations and any electrical needs ahead of time, so install day isn’t a surprise.
- 4
Install day. We remove the old equipment, set the new unit, and make the connections, including proper refrigerant recovery and charging. We check ductwork sealing, airflow and the electrical hookup as we go. The old unit is hauled away at the end.
- 5
Testing and walkthrough. Before we leave, we run the system through full heating and cooling cycles and measure airflow and refrigerant charge. We walk you through the controls and filters and leave you with the paperwork you’ll need for warranty registration.
How Much Does AC Installation Cost in Richardson?
AC installation in Richardson typically runs $3500 – $7500, and that range covers most standard residential replacements. A straightforward replacement of a similarly sized unit in a home with sound ductwork lands near the low end. A larger home, or one that needs ductwork updates alongside the equipment, moves toward the upper end. Ductless mini split work and heat pump systems fall in the same general range depending on the number of zones and the efficiency class you choose. The exact figure depends on tonnage, efficiency rating, brand and whether the line set or ductwork needs work. Getting a written fixed price before the install starts is the simplest way to avoid overpaying, and it’s how we quote every job. You’ll know what’s included before we touch anything.
The free estimate covers a load calculation, a ductwork inspection and a written price for the equipment and labor. We don’t quote a number over the phone and then change it on install day. One thing worth checking as you compare quotes: a price that looks unusually low often leaves out duct sealing, permits or haul-away, and those come back as add-ons later. Compare what’s included, not just the bottom line. Our technicians have up to 14 years of experience with installation work, and we’re happy to show you the difference between equipment options at the estimate.
For repair work rather than replacement, AC installation isn’t the right starting point. If you’re unsure whether your system needs a repair or a replacement, that’s the question our estimate is built to answer.
Our Service Area Near Richardson
We serve homeowners throughout Richardson and the surrounding cities, including Plano, Garland, Allen, Carrollton, Dallas, Mesquite, Lewisville, Irving and Duncanville. Typical response is same-day within Richardson and next-day for most nearby cities, depending on the schedule and the weather. If you’re in the area and need an install quote or a repair call, reach out and we’ll get you on the calendar. If you’re in Plano, our AC installation team covers that side of the metro, and for Garland the same goes with our AC installation service.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About AC Installation in Richardson
AC installation is the process of putting a new cooling system into your home, whether that’s replacing an existing unit or adding central air to a house that doesn’t have it. It includes a load calculation, equipment selection, the physical install and testing through a cooling cycle. It’s different from a repair, which fixes an existing system rather than replacing it. Call (855) 419-6908 for an estimate.
A standard residential AC installation usually takes a single day, though larger homes, ductwork updates or a combined HVAC project can stretch to two days. We confirm the timeline when we book the install date, so you can plan around it. The estimate walkthrough includes an honest schedule. Call (855) 419-6908 to get started.
Typical estimated AC installation in Richardson runs $3500 – $7500, depending on system size, efficiency rating and whether ductwork or line sets need updating. The written estimate sets the final price, so there’s no moving number after you approve it. You’ll see the full breakdown before install day. Call (855) 419-6908 for an exact quote: estimates are free.
Yes, we’re certified on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard equipment. That means our technicians arrive already familiar with how your specific system is built and where it tends to wear. It also means we can honestly compare options across brands rather than steering you toward one. Call (855) 419-6908 to talk through your system.
Same-day service is often available for repairs in Richardson when you call early in the day. Installation itself is scheduled, since it depends on a load calculation and equipment order. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. Call (855) 419-6908 to check availability.
Yes, new equipment carries the manufacturer’s warranty, and we walk you through the terms as part of the install handoff. We also register the equipment so you have the paperwork you need if a claim ever comes up. Labor coverage varies by the equipment you choose, and we’ll explain exactly what applies to yours. Call (855) 419-6908 with questions.
Clear access to the indoor air handler, the outdoor unit and the electrical panel, and make sure someone is home at the start of the visit. Secure pets away from the work area, since install day involves doors opening and equipment moving. That’s the short version; we’ll confirm specifics when we set your date. Call (855) 419-6908 to book your installation.
Schedule Your AC Installation Service in Richardson Today
When your AC is on its last summer, getting ahead of the replacement is far easier than reacting to a failure in August. We’ve got Juniper AC Repair ready to give you a written estimate, an honest equipment comparison and a set install date. Call (855) 419-6908 for a free, no-obligation estimate in Richardson. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. For heating needs, see our furnace repair page.
Written by the team at Juniper AC Repair.